Freestanding sign holder that slips under floor displays or products on pallets and can easily be repositioned. Versatile built-in adjustable post allows messages to be placed low to products or rise above. Signs slide into the short side opening of the included free swinging, rounded corner frame. Attached hanging hooks included. Some minor assembly required.

• For use on flat floor surfaces with no tools required
• Square tubing telescopic post height adjusts from 50" thru 70"
• Frame with attached top rings accepts signs up to 0.050" thick
• Frame hooks are 10" on center
• Sturdy 10" x 10" square base
• Black painted steel material; also available in chrome finish
• One case of #150217B comes with: 6 sign frames, 6 straight posts, 6 angled posts and 6 square bases
• One case of #150218B comes with: 2 sign frames, 2 straight posts, 2 angled posts and 2 square bases
• Sold in full cases only

Reminder: Must be ordered in full cases.

Freestanding sign holder that slips under floor displays or pallets. Adjustable post allows messages to be placed low to products or rise above. Two attached hanging hooks accept our popular part #109506B Spiral Sign Board (sold separately), allowing messages to be changed easily. Some minor assembly required.

• For use on flat floor surfaces with no tools required
• Square tubing telescopic post height adjusts from 48" to 72"
• Spiral Sign Board #109506B not included and would need to be ordered separately
• Frame hooks are 19" on center
• Sturdy 10" x 10" square base
• Black painted steel material
• 2 complete sets per case
• Sold in full cases only

Reminder: Must be ordered in multiples of 2. Each case contains the components for 2 complete sets.

Our tallest freestanding sign holder that slips under floor displays or products on pallets that can easily be repositioned. Versatile built-in adjustable post allows messages to be placed low to products or rise above. Two attached hanging hooks accept free swinging signs or can be used in conjunction with our popular part #107414 Rigid Covered Sign Holder (sold separately). Some minor assembly required.

• For use on flat floor surfaces with no tools required
• Recommended sign hole size is 3/8" diameter with 9" wide on center hole spacing with a maximum width of 15"
• Square tubing telescopic post height adjusts from 52" to 80"
• Rigid Covered Sign Holder #107414 not included and would need to be ordered separately
• Sturdy 10" x 12" rectangular base
• Black painted steel material
• Each case comes with 2 straight posts, 2 angled posts and 2 rectangular bases
• 2 complete sets per case
• Sold in full cases only
• Reminder: Must be ordered in multiples of 2. Each case contains the components for 2 complete sets.

Freestanding sign holder features a 12" stem to hold "take one" bags in grocery environments. Also slides under floor displays or products on pallets. Sign arm can be raised or lowered as desired, while the built-in bag stem remains fixed at 34" high. Sign frame (included) holds 11" high x 14" wide signs, with insertion/removal from the side. Some minor assembly required.

• For use on flat floor surfaces with no tools required
• Square tubing telescopic post adjusts from 52" to 66"
• Sturdy 10" x 12" rectangular base
• Black painted steel material
• 6 complete sets per case
• Sold in full cases only

Freestanding sign holder features a fixed, welded frame on top, with extra-tall adjustment capacity. Also slides under floor displays or products on pallets. Sign arm can be raised or lowered as desired. Sign frame holds 7" high x 11" wide signs, with insertion/removal from the top. Some minor assembly required.

• For use on flat floor surfaces with no tools required
• Square tubing telescopic post adjusts from 49" to 79"
• Sturdy 10" x 10" square base
• Black painted steel material
• 2 complete sets per case
• Sold in full cases only