800.323.2389
Contact Us
Download Our Catalog
Phone: 800-323-2389
Fax: 847-623-0105
Email: sales@kinter.com
Request Information
Download Catalog

Products
Custom Design & Capabilities
Display Categories
Resources
- Blog
- Catalog
About

Products
Custom Design & Capabilities
Display Categories
Resources
- Blog
- Catalog
About

800.323.2389
Contact Us
Download Our Catalog
Phone: 800-323-2389
Fax: 847-623-0105
Email: sales@kinter.com
Request Information
Download Catalog

Speak with KinterCare™

New Products Label Solutions Display Hooks Product Merchandising Sign & Literature Holders Display Construction Rings & Binder Posts Ceiling Systems & Accessories Cable & Chain K-Stick® Ladderless Sign Hanging System Fasteners & Secondary Operations Free Sample Rack siffron™ Part Number Cross-Reference Guide*

Download Catalog

Quotes (0)

All Categories > K-Stick® Ladderless Sign Hanging System > Banner Hangers

Banner Hangers

Request Information

Banner Hangers banner-hangers

Ladderless Magnetic Banner Hanger

Ladderless Magnetic Banner Hanger

(3) A safe and simple way to hang signs and banners from metal ceiling grids/surfaces that are up to 23 feet in height. One piece, strong magnetic design with integrated holes and a "C" channel bottom track that accepts various sign hanging options such as plastic and metal hooks, clips, rings, cable or chain (all sold separately). For use from ground level with our K-Stick® Ladderless Poles. Simply pick a sign hanging option, attach to both the hanger and the edge of the graphic, elevate, align into position and release - it's that easy! Removable and reusable - all safely from floor level. Warning: Metal conditions will affect holding power. Magnets should not be used near electronic equipment. Patented.

7/8" wide x 1-1/8" overall height (including attached ceramic magnets)
Three 3/16" diameter hanging holes (two end holes and one center hole)
Not recommended for use on ceiling grid perimeters
Custom lengths and colors available
White PVC with nickel plated steel magnets
* Safe working load limit is based on a single banner hanger having a minimum of two sign hanging points

/Asset/ladderless_magnetic_banner_hanger.jpg

Ladderless 360 Degree Magnetic Banner Hanger

Ladderless 360 Degree Magnetic Banner Hanger

(3) A safe and simple way to hang signs and banners from metal ceiling grids/surfaces that are up to 23 feet in height. Unlike our stationary ladderless options, this hanger turns a full 360 degrees, thus allowing your signage to be faced at optimal viewing angles. Strong magnetic design with integrated holes and a "C" channel bottom track that accepts various sign hanging options such as plastic and metal hooks, clips, rings, cable or chain (all sold separately). For both placing and pivoting from ground level, use our K-Stick® Ladderless Poles. Simply pick a sign hanging option, attach to both the hanger and the edge of the graphic, elevate, align into position and release - it's that easy! Removable and reusable - all safely from floor level. Warning: Metal conditions will affect holding power. Magnets should not be used near electronic equipment. Patented.

1-1/8" wide x 1-5/8" overall joined height (including attached ceramic magnets)
Two 3/16" diameter hanging holes (one at each end)
Not recommended for use on ceiling grid perimeters
Custom lengths and colors available
White PVC with nickel plated steel magnets
* Safe working load limit is based on a single banner hanger having a minimum of two sign hanging points

/Asset/220532-CROPPED.jpg

Ladderless Magnetic Banner Hanger - Heavy Duty

Ladderless Magnetic Banner Hanger - Heavy Duty

An even stronger version of our popular Ladderless Magnetic Banner Hanger. With three separate 3" long ceramic magnets attached closer together, this heavy duty banner hanger will stand up to any competitor's neodymium magnetic holders. A safe and simple way to hang larger, heavier signs from metal ceiling grids/surfaces that are up to 23 feet in height. One piece, strong magnetic design with attached end cap retainers, integrated holes and a "C" channel bottom track that accepts various sign hanging options such as metal hooks, clips, rings, cable or chain (all sold separately). For use from ground level with our K-Stick® Ladderless Poles. Simply pick a sign hanging option, attach to both the hanger and the edge of the graphic, elevate, align into position and release - it's that easy! Removable and reusable - all safely from floor level. Warning: Metal conditions will affect holding power. Magnets should not be used near electronic equipment. Patented.

7/8" wide x 1-1/8" overall height (including attached ceramic magnets)
Three 3/16" diameter hanging holes (two end holes and one center hole)
Attached white end cap retainers included
For best strength results, hang signs from the two end holes or in a sling-like fashion
Not recommended for use on ceiling grid perimeters or with our Ladderless Mounting Plates
Custom colors available
White PVC with nickel plated steel magnets
* Safe working load limit is based on a single banner hanger having a minimum of two sign hanging points

/Asset/220517_Grid.jpg

Ladderless Magnetic "C" Channel Banner Hanger

Ladderless Magnetic "C" Channel Banner Hanger

(3) When used with our Ladderless Mounting Strips (sold separately), this ingenious 90 degree sign hanger makes it both safe and simple to magnetically hang and display signs and posters from the inside of window frames. Can also be used in conjunction with our Ladderless Mounting Plates (sold separately) to hang signs directly from drywall ceilings. Also works well on ceiling grids and the lip of ceiling grid perimeters. One piece, strong magnetic design with integrated holes and a "C" channel bottom track that accepts various sign hanging options, such as plastic and metal hooks, clips, rings, cable, or chain (all sold separately). Also use in conjunction with our Plastic Banner Dowel Rod (sold separately) to display sewn/hemmed fabric or vinyl banners for a clean finished appearance. For use from ground level with our K-Stick® Ladderless Poles. Removable and reusable - all safely from floor level. Warning: Metal conditions will affect holding power. Magnets should not be used near electronic equipment. Patented.

2" wide x 2" overall height (including attached ceramic magnets)
Three 3/16" diameter hanging holes (two end holes and one center hole)
Not recommended for outdoor use
Custom lengths and colors available
White PVC with nickel plated magnets
* Safe working load limit is based on a single banner hanger having a minimum of two sign hanging points

/Asset/220523-grid.jpg

Ladderless Magnetic Gripper Apollo Banner Hanger

Ladderless Magnetic Gripper Apollo Banner Hanger

(3) When used with our Ladderless Mounting Strips (sold separately), this ingenious, 90 degree hinged sign hanger makes it both safe and simple to magnetically hang and display signs and posters from the inside of window frames. Can also be used in conjunction with our Ladderless Mounting Plates (sold separately) to hang signs directly from drywall ceilings. Also works well on ceiling grids and the lip of ceiling grid perimeters. For use from ground level with our K-Stick® Ladderless Poles. Designed to quickly and easily attach a banner to the hanger. Just snap open, insert sign and snap down to close. Removable and reusable - all safely from floor level. Warning: Metal conditions will affect holding power. Magnets should not be used near electronic equipment. Patented.

2" wide x 1-7/8" overall height (including attached ceramic magnets)
Not recommended for outdoor use
Custom lengths and colors available
White PVC with nickel plated steel magnets

/Asset/220121with220551close.jpg

Ladderless Magnetic Gripper Banner Hanger

Ladderless Magnetic Gripper Banner Hanger

(3) When used with our Ladderless Mounting Strips (sold separately), this ingenious 90 degree sign hanger makes it both safe and simple to magnetically hang and display signs and posters from the inside of window frames. Can also be used in conjunction with our Ladderless Mounting Plates (sold separately) to hang signs directly from drywall ceilings. Also works well on ceiling grids and the lip of ceiling grid perimeters. For use from ground level with our K-Stick® Ladderless Poles. Gripper fins hold heavier or longer length signs securely. Removable and reusable - all safely from floor level. Warning: Metal conditions will affect holding power. Magnets should not be used near electronic equipment. Patented.

2" wide x 1-1/4" overall height (including attached ceramic magnets)
Two 5/32" diameter cross-member mounting holes - one on each side
Not recommended for outdoor use
Custom lengths and colors available
White PVC with nickel plated magnets

/Asset/220563-grid.jpg

Ladderless Magnetic Atlas Banner Hanger

Ladderless Magnetic Atlas Banner Hanger

(3) When used with our Ladderless Mounting Strips (sold separately), this ingenious, 90 degree sign hanger makes it both safe and simple to magnetically hang and display signs from the inside of window frames. Can also be used in conjunction with our Ladderless Mounting Plates (sold separately) to hang signs directly from drywall ceilings. Also works well on ceiling grids and the lip of ceiling grid perimeters. For use from ground level with our K-Stick® Ladderless Poles. Slides directly onto the top edge of banners or posters for a secure friction fit. Removable and reusable - all safely from floor level. Warning: Metal conditions will affect holding power. Magnets should not be used near electronic equipment. Patented.

2" wide x 1-1/4" overall height (including attached ceramic magnets)
Not recommended for outdoor use
Custom lengths and colors available
White PVC with nickel plated steel magnets

/Asset/220121with220527close.jpg

Magnetic Ladderless Ceiling Clip & Cord

Magnetic Ladderless Ceiling Clip & Cord

(2) A magnetic version of our highly popular Ceiling Twist Clip & Cord. Use to suspend lightweight signs, mobiles, banners, and seasonal decorations. Easily attaches magnetically to ceiling grids or other exposed metal overhead ceiling fixtures/supports. Unravel wound barbed cord to desired length. Built-in slits allow for micro adjustments of cord lengths for even hanging. Works with our K-Stick® Ladderless Poles for simple installation and removal from ground level. Warning: Always test suitability on a per application basis. Metal conditions will affect holding power. Magnets should not be used near electronic equipment. Patented.

3" long x 7/8" wide x 1-1/4" overall height (including attached ceramic magnet)
Clip has three evenly spaced 0.156" diameter holes
Also available with black cord
White styrene clip with nickel plated steel magnet

/Asset/220075close.jpg

Magnetic Ladderless Ceiling Clip With Holes

Magnetic Ladderless Ceiling Clip With Holes

Use to suspend lightweight signs, mobiles, banners, and seasonal decorations. Easily attaches magnetically to ceiling grids or other exposed metal overhead ceiling fixtures/supports. Small holes make it great for attaching wire hooks and barbed cords (sold separately). Works with our K-Stick® Ladderless Poles for simple installation and removal from ground level. Warning: Always test suitability on a per application basis. Metal conditions will affect holding power. Magnets should not be used near electronic equipment. Patented.

3" long x 7/8" wide x 1-1/4" overall height (including attached ceramic magnet)
Clip has three evenly spaced 0.156" diameter holes
White styrene clip with nickel plated steel magnet

/Asset/220070-CROPPED.jpg

Magnetic Ladderless Ceiling Clothes Hanger Adapter

Magnetic Ladderless Ceiling Clothes Hanger Adapter

A safe and simple way to suspend and display varieties of garments for any occasion, message or season. This inexpensive hanger adapter easily attaches magnetically to ceiling grids or other exposed metal overhead ceiling fixtures/supports. Further, when combined with our Ladderless Mounting Strips, this ingenious hanger also makes it easy to place or change out clothes from the inside of window frames. For use from ground level with our K-Stick® Ladderless Poles. Create full 360 degree optimal clothing viewing angles by combining with swiveling hook clothes hangers (not included). For extra hanging length from taller ceilings or windows, simply combine with our Block End Hooks and/or End Cap Retainers. Warning: Metal conditions will affect holding power. Magnets should not be used near electronic equipment.

7/8" wide x 6" long x 1-1/8" overall height (including attached ceramic magnets)
0.406" long slotted hole size on one end for hooking of clothes hanger
Can be used with either stationary (non-swiveling) or swivel hook style clothes hangers - not included
Not for use with oversized plastic clothes hangers or with our line of ladderless mounting plates for drywall ceilings
White PVC with nickel plated magnets
Custom colors also available
* Includes the weight of the clothes hanger being used

/Asset/a2799.jpg

Ladderless Magnetic "C" Channel Wall Banner Hanger

Ladderless Magnetic "C" Channel Wall Banner Hanger

(3) When used with our Ladderless Mounting Plates (sold separately), this ingenious 90 degree sign hanger makes it both safe and simple to magnetically hang and display signs flush from walls. One piece, strong magnetic design with integrated holes and a "C" channel bottom track that accepts various sign hanging options, such as plastic and metal hooks, clips, rings, cable or chain (all sold separately). Also use in conjunction with our Plastic Banner Dowel Rod (sold separately) to display sewn/hemmed fabric or vinyl banners for a clean finished appearance. For use from ground level with our K-Stick® Ladderless Poles. Removable and reusable - all safely from floor level. Warning: Metal conditions will affect holding power. Magnets should not be used near electronic equipment. Patented.

2-1/4" wide x 1-3/4" overall height (including attached ceramic magnets)
Three 3/16" diameter hanging holes (two end holes and one center hole)
Not recommended for outdoor use
Custom lengths and colors available
White PVC with nickel plated magnets
* Safe working load limit is based on a single banner hanger having a minimum of two sign hanging points

/Asset/220556-wall.jpg

Ladderless Magnetic Gripper Apollo Wall Banner Hanger

Ladderless Magnetic Gripper Apollo Wall Banner Hanger

(3) When used with our Ladderless Mounting Plates (sold separately), this ingenious, 90 degree hinged sign hanger makes it both safe and simple to magnetically hang and display signs and posters flush from walls. For use from ground level with our K-Stick® Ladderless Poles. Designed to quickly and easily attach a banner to the hanger. Just snap open, insert sign and snap down to close. Removable and reusable - all safely from floor level. Warning: Metal conditions will affect holding power. Magnets should not be used near electronic equipment. Patented.

2-1/4" wide x 1-1/2" overall height (including attached ceramic magnets)
Not recommended for outdoor use
Custom lengths and colors available
White PVC with nickel plated steel magnets

/Asset/220547close.jpg

Ladderless Magnetic Gripper Wall Banner Hanger

Ladderless Magnetic Gripper Wall Banner Hanger

(3) When used with our Ladderless Mounting Plates (sold separately), this ingenious 90 degree sign hanger makes it both safe and simple to magnetically hang and display signs flush from walls. For use from ground level without K-Stick® Ladderless Poles. Gripper fins hold heavier or longer length signs securely. Removable and reusable - all safely from floor level. Warning: Metal conditions will affect holding power. Magnets should not be used near electronic equipment. Patented.

2-1/4" wide x 1" overall height (including attached ceramic magnets)
Two 5/32" diameter cross-member mounting holes - one on each side
Not recommended for outdoor use
Custom lengths and colors available
White PVC with nickel plated magnets

/Asset/220574-Wall.jpg

Ladderless Magnetic Atlas Wall Banner Hanger

Ladderless Magnetic Atlas Wall Banner Hanger

(3) When used with our Ladderless Mounting Plates (sold separately), this ingenious, 90 degree sign hanger makes it both safe and simple to magnetically hang and display signs flush from walls. For use from ground level with our K-Stick® Ladderless Poles. Slides directly onto the top edge of banners or posters for a secure friction fit. Removable and reusable - all safely from floor level. Warning: Metal conditions will affect holding power. Magnets should not be used near electronic equipment. Patented.

2-1/4" wide x 1" overall height (including attached ceramic magnets)
Not recommended for outdoor use
Custom lengths and colors available
White PVC with nickel plated steel magnets

/Asset/220503_1.jpg

Ladderless Stackable Spiral Sign Board

Ladderless Stackable Spiral Sign Board

Add promotional signs or change pricing easily. Removable and reusable - all safely from floor level. When used with our Ladderless Magnetic Gripper Banner Hanger #220561 and our Stackable Push- In Fastener #120411 (both sold separately) this modular, double sided sign board holds and displays common Spiral Sign Board Pads (also sold separately). Side-access spiral sign pads insert and remove easily to change prices. Attach one spiral sign board to another in a "ladder" fashion to create dual messaging, or combine with our Stackable "C" Channel Sign Board(s) to add single or multiple top/bottom sign inserts. Warning: Each sign board connection must be securely held together with our Stackable Push-In Fasteners #120411. Patented

Two 1/4" diameter top mounting/hanging holes (one at each end)
Upper mounting track section holds common 3/8" diameter spiral bound sign pads
Lower "J" style mounting track section holds pads up to 5/32" thick
Also accepts 8-1/4" tall sign inserts up to 5/32" thick
Custom colors, lengths, heights or one sided boards also available
White high impact polystyrene (HIPS) material

/Asset/a2802.jpg

Ladderless Stackable "C" Channel Sign Board

Ladderless Stackable "C" Channel Sign Board

Add promotional signs or change message inserts easily. Removable and reusable - all safely from floor level. When used with our Ladderless Magnetic Gripper Banner Hanger #220561 and our Stackable Push-In Fastener #120411 (both sold separately) this modular, double sided track holds and displays multi-pricing inserts and directory or aisle identification signs. Attach one "C" channel sign board to another in a "ladder" fashion to create dual messaging, or combine with our Stackable Spiral Sign Board(s) to add single or multiple top/bottom spiral bound pricing information. Warning: Each sign board connection must be securely held together with our Stackable Push-In Fasteners #120411. Patented.

Two 1/4" diameter top mounting/hanging holes (one at each end)
Open face design on both sides accepts 5-1/2" tall signs that are up to 3/32" thick
For taller signs simply use multiple stacked channels
Custom colors, lengths, heights or one sided boards also available
White high impact polystyrene (HIPS) material

/Asset/a2804.jpg

Stackable Push-In Fastener

Stackable Push-In Fastener

Use to connect our line of modular "C" channel and spiral sign boards to each other in a "ladder" fashion (one below the other), or to make each "ladderless" by attaching to our Magnetic Gripper Banner Hanger #220561 - all sold separately. Acts as a cross-member when pressed into mating holes along the top or bottom edges of our family of stackable message boards. Hollow body design allows the clip to compress when pushed into hole, then expand back for a secure hold that resists removal. No tools required. Removable and reusable.

Press fit into 5/32" diameter pre-drilled/punched holes
Proper installation occurs when the head is seated completely to the mating sign board or banner hanger
Natural 6/6 nylon material
Also available in black or special colors

/Asset/a2806.jpg

Ladderless Binder Cleat Wall Banner Hanger

Ladderless Binder Cleat Wall Banner Hanger

(8) Are you looking to mount large signs directly to walls? If so, we have the solution! This ingenious two piece, interlocking wedge-shaped banner hanger assembly makes it safe and simple to display and change out signs of almost any size directly from walls. Each assembly consists of one wall mount track and one binder banner hanger piece - both sold separately. Simply prep the wall by screwing the wall mount track piece to the wall (mounting hardware included) and then fasten the binder banner hanger piece onto the top edge of the sign (barrel bolt and screw fastening hardware included) and gravity does the rest. Signs hang approximately 1 inch offset from wall which, when combined at the bottom of the sign with our #150675 Square Foam Blocks, creates a handsome dimensional effect. Removable and reusable - all safely from floor level. For use from ground level with our K-Stick® Ladderless Poles . Warning: Not recommended for outdoor use. Wall mount track must be firmly attached to wall. Male and female barrel bolt fastening hardware must be fully screwed together. Patented.

Wall mount track and binder banner hanger piece are each sold separately
Wall mount track has holes at 16" on center and comes with toggle screw anchors, stud screws and an instruction sheet
Pre-drilling of holes for wall mount track is required (drill bit sold separately)
Wall mount track piece is 3" tall x 1" wide
Binder banner hanger piece has multiple 5/16" diameter holes - please inquire for recommended sign hole size and placement
Binder banner hanger piece comes with white painted steel male and female barrel bolt fastening hardware and an instruction sheet
Binder banner hanger piece is 1-3/4" tall x 2-1/2" wide
Custom colors and lengths available
White PVC material
* For larger, heavier signs over 5 pounds it is possible to have two or more individuals, each with a K-Stick®, raise or lower simultaneously.

/Asset/a2808.jpg

Foam Block Stand-Off

Foam Block Stand-Off

Foam block stand-offs add dimension to displays and signage. Used to create a 3-D effect that makes your graphics stand out. Place foam blocks 1"-2" from the edge of your graphic to create multi-layered displays for added depth. Can also be used to create gondola shelf wobblers or aisle violators.

1" H x 1" W x 1" L square blocks
Permanent adhesive on two opposing sides - simply peel and stick
Can be stuck together to create longer stand-offs
White foam material
36 kiss-cut blocks per sheet
Sold in full sheets only

/Asset/Foam-Block-Stand-Off-close-up-3x5.jpg

Ladderless "C" Channel Cleat Wall Banner Hanger

Ladderless "C" Channel Cleat Wall Banner Hanger

(8) Are you looking to hang large vinyl, sewn/hemmed banner type signs directly from walls? If so, we have the solution! This ingenious two piece, interlocking wedge-shaped banner hanger assembly makes it safe and simple to display and change out banners of almost any size directly from walls. Each assembly consists of one wall mount track and one banner hanger piece - both sold separately. Also requires our Plastic Banner Dowel Rod (sold separately) to display sewn/hemmed fabric or vinyl banners for a clean finished appearance. "C" channel bottom section also accepts various sign hanging options, such as plastic block end hooks or our line of ladderless clips. Simply prep the wall by screwing the wall mount track piece to the wall (mounting hardware included) and then fasten the "C" channel hanger piece onto the top edge of the banner and gravity does the rest. Signs hang approximately 1 inch offset from wall which creates a handsome dimensional effect. Removable and reusable - all safely from floor level. For use from ground level with our K-Stick® Ladderless Poles. Warning: Not recommended for outdoor use. Wall mount track must be firmly attached to wall. Patented.

Wall mount track and "C" channel banner hanger piece are each sold separately
Wall mount track has holes at 16" on center and comes with toggle screw anchors, stud screws and an instruction sheet
Pre-drilling of holes for wall mount track is required (drill bit sold separately)
Wall mount track piece is 3" tall x 1" wide
"C" channel banner hanger piece accepts our line of Plastic Banner Dowel Rods (sold separately)
"C" channel banner hanger piece is 1-3/4" tall x 2-1/4" wide
Custom colors and lengths available
White PVC material
* For larger, heavier signs over 5 pounds it is possible to have two or more individuals, each with a K-Stick®, raise or lower simultaneously.

/Asset/a2812.jpg

Ladderless Cleat Banner Hanger For Glass

Ladderless Cleat Banner Hanger For Glass

(8) Are you looking to mount signs directly to glass and windows? If so, we have the solution! This ingenious two piece, interlocking wedge-shaped banner hanger assembly makes it safe and simple to display and change out signs and posters directly from glass surfaces. Each assembly consists of one suction cup track piece and one banner hanger piece - both sold separately. Simply prep the window by affixing the suction cup track piece to the glass and then slide the Atlas friction fit banner hanger piece onto the top edge of the graphic and gravity does the rest. For use from ground level with our K-Stick® Ladderless Poles. Removable and reusable - all safely from floor level. Warning: Suction cup release tabs must not face directly upward or mating banner hanger may catch and cause cups to release. Please note: Temperature and humidity may cause a suction cup to lose its grip. When applied to a clean, dry, non-porous surface above 40°F (5°C), these cups should have an operating range of -22° to 120°F (-30° to 49°C). Patented.

Suction Cup Track and Atlas Banner Hanger are each sold separately
Suction cup track piece comes with 2-1/2" O.D. pre-assembled suction cups, measures 1-1/2" in total height, and requires a minimum of 2-1/2" of clearance from the top of window frame
Atlas friction fit banner hanger piece is 2" wide x 1" overall height
Not recommended for outdoor use
Custom colors and lengths available
Clear PVC material

/Asset/220610C.jpg

Ladderless Mini Hook Banner Hanger

Ladderless Hook Banner Hanger

(4) A safe and simple way to hang signs and banners from exposed metal overhead ceiling fixtures or supports that are up to 23 feet in height. One-piece, strong shepherd shaped open hook design with integrated holes and a "C" channel bottom track that accepts various sign hanging options such as plastic and metal hooks, clips, rings, cable, or chain (all sold separately). For use from ground level with our K-Stick® Ladderless Poles. Two hook sizes available: larger diameter "standard" hooks are ideal for hanging from larger fixtures; smaller diameter "mini" hooks are great when hanging from smaller ceiling fixtures or supports of 1-1/4" diameter or less. Simply pick a sign hanging option, attach to both the hanger and the edge of the graphic, elevate, hook into position and release. Removable and reusable - all safely from floor level. Patented.

7/8" wide x 15/16" height extrusion size
Attached 0.148" diameter wire metal shepherd shaped hooks are available in two different sizes.
Three 3/16" diameter hanging holes (two end holes and one center hole)
Custom lengths and colors available
White PVC with zinc plated metal hooks
* Safe working load limit is based on a single banner hanger having a minimum of two sign hanging points

/Asset/a2814.jpg

Ladderless 360 Degree Hook Banner Hanger

Ladderless 360 Degree Hook Banner Hanger

(4) A safe and simple way to hang signs and banners from exposed overhead ceiling fixtures or supports that are up to 23 feet in height. Unlike our stationary ladderless options, this hanger turns a full 360 degrees, thus allowing your signage to be faced at optimal viewing angles. Two hook sizes available: larger diameter "standard" hooks are ideal for hanging from larger fixtures; smaller diameter "mini" hooks are great when hanging from smaller ceiling fixtures or supports of 1-1/4" diameter or less. Strong shepherd open hook design with integrated holes and a "C" channel bottom track that accepts various sign hanging options such as plastic and metal hooks, clips, rings, cable, or chain (all sold separately). For both placing and pivoting from ground level, use our K-Stick® Ladderless Poles. Simply pick a sign hanging option, attach to both the hanger and the edge of the graphic, elevate, hook into position and release. Removable & reusable - all safely from floor level. Patented.

1-1/8" wide x 1-7/16" height joined extrusion size
Attached 0.148" diameter wire metal shepherd shaped hooks are available in two different sizes
Two 3/16" diameter hanging holes (one at each end)
Custom lengths and colors available
White PVC with zinc plated metal hooks
* Safe working load limit is based on a single banner hanger having a minimum of two sign hanging points

/Asset/220536-Warehouse.jpg

Ladderless Heavy Duty Mini Hook Banner Hanger

Ladderless Hook Banner Hanger - Heavy Duty

(2) An even stronger version of our popular Ladderless Hook Banner Hanger. By simply placing our shepherd shaped open hooks closer together, this heavy duty banner hanger is a safe and simple way to hang larger, heavier signs from exposed overhead ceiling fixtures or supports that are up to 23 feet in height. Two hook sizes available: larger diameter "standard" hooks are ideal for hanging from larger fixtures; smaller diameter "mini" hooks are great when hanging from smaller ceiling fixtures or supports of 1-1/4" diameter or less.One-piece, strong hook design with attached end cap retainers, integrated holes and a "C" channel bottom track that accepts various sign hanging options such as metal hooks, clips, rings, cable, or chain (all sold separately). For use from ground level with our K-Stick® Ladderless Poles . Simply pick a sign hanging option, attach to both the hanger and the edge of the graphic, elevate, hook into position and release. Removable & reusable - all safely from floor level. Patented.

7/8" wide x 15/16" height extrusion size
Attached 0.148" diameter wire metal shepherd shaped hooks are available in two different sizes
Three 3/16" diameter hanging holes (two end holes and one center hole)
Attached white end cap retainers included
For best strength results, hang signs from the two end holes or in a sling-like fashion
Custom colors available
White PVC with zinc plated metal hooks
* Safe working load limit is based on a single banner hanger having a minimum of two sign hanging points.

/Asset/a2819.jpg

Custom Design & Capabilities

Display Categories

Continuous Improvement Program (CIP)

Contact Us
Phone: 800.323.2389
Fax: 847.623.0105
Email: sales@kinter.com

3333 Oak Grove Ave.
Waukegan, IL 60087

Request Information

Download Catalog

© 2024 Kinter | Privacy Policy | Terms & Conditions | Site Map

Kinter's (K International, Inc.'s) parts are not manufactured by or connected in any way with Siffron^™.