Gripper Sign Holders
gripper-sign-holders
How it works: Simply snap apart the attached break-away leg, engage leg at desired width, micro-adjust and press onto fixture.
Gripper Sign Holder
(9) Gripper fins hold sign securely in vertical (flag) or horizontal position. Adhesive bottom adheres to clean, flat surfaces. Use wider base for more stability.- 1/2" height
- Holds material up to 0.080" thick
- Custom lengths available
- Parts listed below are stocked with either standard “permanent” or optional “removable” adhesive
- Available without adhesive or with a magnet
- Clear PVC material
Heavy Duty Gripper Sign Holder - Narrow
(3) Heavy duty style holds thicker sign and display material than standard gripper sign holders. Gripper fins hold securely in either vertical (flag) or horizontal position. Adhesive base adheres to clean, flat surfaces.- Custom lengths available
- Available without adhesive
- Clear PVC material
Heavy Duty Gripper Sign Holder - Wide
(4) Heavy duty style holds thicker sign and display material than standard gripper sign holders. Wider base offers more stability. Gripper fins hold securely in either vertical (flag) or horizontal position. Adhesive base adheres to clean, flat surfaces.- Custom lengths available
- Available without adhesive
- Clear PVC material
Heavy Duty Gripper Sign Holder - Extra Wide
(2) Gripper fins coupled with extra wide base offers great stability and strength. Gripper fins hold larger signs securely in either vertical (flag) or horizontal position. Adhesive base adheres to clean, flat surfaces.- Custom lengths available
- Clear PVC material
Hinged Gripper Sign Holder
(6) Great for mounting signs in high traffic areas. Flexible hinge swings and returns to original position when bumped. Gripper fins hold sign firmly in vertical (flag) or horizontal position. Adhesive bottom adheres to clean, flat surfaces.- Custom lengths available
- Available without adhesive or with a magnet
- Clear PVC material
Rotatable Gripper Sign Holder
Two-piece rotating design. Gripper fins hold sign firm in either vertical (flag) or horizontal position. Permanent foam adhesive bottom adheres to any clean, flat surface.- Maximum viewing angle of 80 degrees
- Custom lengths available
- White PVC material
Wide Base Gripper Sign Holder
Gripper fins coupled with wide base offers extra stability for advertisements or cards. Great for use on table or desk tops as a freestanding unit.- No adhesive
- Custom lengths available
- Clear PVC material
Gripper T-Style Table Top Sign Holder
(2) Gripper fins coupled with extra wide base offers great stability for table top signage.- Custom lengths available
- Also available with adhesive
- Clear PVC material
Hinged Gripper Offset Sign Holder
Gripper sign holder that attaches to the top or sides of any clean, flat surface such as shelves and pallet rack uprights and cross members. Easily attach pricing or product information offset and extended into the aisle in horizontal (flush) position. Built-in hinge function flips the sign up when stocking shelves below.- 1-1/2" long adhesive backed shelf attachment strip
- Gripper fins hold signs firmly up to 0.080" thick
- Extends 3/4" out from shelf edge
- Custom lengths and colors available
- Clear PVC material
Universal Adjustable Flush Grippers
(8) This patented design is universal, interchangeable and inexpensive. Add flush mounted signs and displays to most square edged gondola end caps, uprights, cross members, wing panels or any other (metal or wood) retail or warehouse fixture. One clip does it all. Built-in ratcheting settings allow for fine adjustments; thus, undersized or oversized store fixtures are never a problem. Gripper fins hold signs securely with no adhesive or fasteners required. Each clip is produced and shipped as one piece and is eco-friendly since it is removable and reusable.How it works: Simply snap apart the attached break-away leg, engage leg at desired width, micro-adjust and press onto fixture.
- Retail style has 1" tall fixture gripper legs and a pre-breakaway width of 3-1/2"
- Warehouse style has 1-1/4" tall fixture gripper legs and a pre-breakaway width of 3-7/8"
- Custom lengths available
- Clear PVC material
Perpendicular Gripper Sign Holder
Attach signs across open freezer cases or display cases using this perpendicular sign holder with dual grippers, fused together on a high-impact plastic base. Features a heavy-duty bottom gripper and a second gripper on top to hold graphics. Use two units on either side of freezer/display cases to support larger blade signs.- Bottom gripper has a capacity of 0.625" to 0.750"
- Sign gripper has a capacity of 0.187" to 0.250"
- Grippers are clear PVC
- Connecting base is clear polycarbonate
Gripper Square Edge Sign Holder
(2) Add signage vertically or horizontally to metal or wood square edged fixtures. Use two pieces to hold larger graphics or blade signs. Gripper fins hold signs securely. Available in two edge capacity grip ranges - narrow base or wide base.- Both sizes are 1-5/8" overall height and have 7/8" tall gripper fin section
- The narrow base capacity part has a 3/4" wide base
- The wide base capacity part has a 1" wide base
- Clear PVC material
Hinged Gripper Square Edge Sign Holder
Great for mounting signs in high traffic areas. Flexible hinge swings and returns to original position when bumped. Add signage vertically or horizontally to metal or wood square edged fixtures.- 2" overall height
- Integrated flexible hinge joins 7/8" tall gripper to a 1" wide base
- Custom lengths available
- Clear PVC material
Gondola Top Gripper Sign Holder
(2) Great for mounting signs on top of gondolas without the need for adhesive. Base has gripper fins that attach securely onto the top of standard retail gondolas. Removable and easy to relocate. Soft gripper fins allow for easy sign insertion and holds signs firmly in place.- 1" height
- Custom lengths available
- Clear PVC material
Gondola Upright Gripper Sign Holder
(4) Gripper fins hold signs firmly in vertical (flag) position. Use two or more holders for larger signs. Hinged style option is great for mounting signs in high traffic areas - flexible hinge swings and returns to original position when bumped. The base is designed to fit into most standard gondola uprights. Removable and reusable. No assembly required. Patented & Patent Pending.- Grippers are 3" long x 3/4" wide base
- Small capacity grippers have 3/4" height; large capacity grippers have 1" height
- Grippers are made of clear PVC material
- Integrated adhesive/glue attached base
- Base is made of white ABS material
Ceiling Fan Sign Gripper
Fits most ceiling fans on display in a retail environment. Gripper fins on the base attach to the fan blade, while the smaller gripper (leg) holds a sign or pricing material.- Two grippers joined by an integrated flexible hinge
- 90 degree angle connects 1-1/2" height base to 1-3/4" height leg
- Overall length is 1-1/2"
- Clear PVC material
