(9)Gripper fins hold sign securely in vertical (flag) or horizontal position. Adhesive bottom adheres to clean, flat surfaces. Use wider base for more stability.
1/2" height
Holds material up to 0.080" thick
Custom lengths available
Parts listed below are stocked with either standard “permanent” or optional “removable” adhesive
(3)Heavy duty style holds thicker sign and display material than standard gripper sign holders. Gripper fins hold securely in either vertical (flag) or horizontal position. Adhesive base adheres to clean, flat surfaces.
(4)Heavy duty style holds thicker sign and display material than standard gripper sign holders. Wider base offers more stability. Gripper fins hold securely in either vertical (flag) or horizontal position. Adhesive base adheres to clean, flat surfaces.
(2)Gripper fins coupled with extra wide base offers great stability and strength. Gripper fins hold larger signs securely in either vertical (flag) or horizontal position. Adhesive base adheres to clean, flat surfaces.
(6)Great for mounting signs in high traffic areas. Flexible hinge swings and returns to original position when bumped. Gripper fins hold sign firmly in vertical (flag) or horizontal position. Adhesive bottom adheres to clean, flat surfaces.
Two-piece rotating design. Gripper fins hold sign firm in either vertical (flag) or horizontal position. Permanent foam adhesive bottom adheres to any clean, flat surface.
Gripper sign holder that attaches to the top or sides of any clean, flat surface such as shelves and pallet rack uprights and cross members. Easily attach pricing or product information offset and extended into the aisle in horizontal (flush) position. Built-in hinge function flips the sign up when stocking shelves below.
1-1/2" long adhesive backed shelf attachment strip
(8)This patented design is universal, interchangeable and inexpensive. Add flush mounted signs and displays to most square edged gondola end caps, uprights, cross members, wing panels or any other (metal or wood) retail or warehouse fixture. One clip does it all. Built-in ratcheting settings allow for fine adjustments; thus, undersized or oversized store fixtures are never a problem. Gripper fins hold signs securely with no adhesive or fasteners required. Each clip is produced and shipped as one piece and is eco-friendly since it is removable and reusable.
How it works: Simply snap apart the attached break-away leg, engage leg at desired width, micro-adjust and press onto fixture.
Retail style has 1" tall fixture gripper legs and a pre-breakaway width of 3-1/2"
Warehouse style has 1-1/4" tall fixture gripper legs and a pre-breakaway width of 3-7/8"
(3)Heavy duty style holds thicker signs securely in flush position. Also can be snapped over wire up to 0.250" diameter with the adhesive side used to hold signs, displays or literature holders. Adhesive backing adheres to any clean, flat surface.
(4)Gripper fins hold sign securely in flush position. Can also be snapped over 0.080" diameter wire with adhesive side used to hold signs, lightweight displays or literature holders. Adhesive backing adheres to any clean, flat surface.
Attach signs across open freezer cases or display cases using this perpendicular sign holder with dual grippers, fused together on a high-impact plastic base. Features a heavy-duty bottom gripper and a second gripper on top to hold graphics. Use two units on either side of freezer/display cases to support larger blade signs.
(2)Add signage vertically or horizontally to metal or wood square edged fixtures. Use two pieces to hold larger graphics or blade signs. Gripper fins hold signs securely. Available in two edge capacity grip ranges - narrow base or wide base.
Both sizes are 1-5/8" overall height and have 7/8" tall gripper fin section
The narrow base capacity part has a 3/4" wide base
Great for mounting signs in high traffic areas. Flexible hinge swings and returns to original position when bumped. Add signage vertically or horizontally to metal or wood square edged fixtures.
2" overall height
Integrated flexible hinge joins 7/8" tall gripper to a 1" wide base
(2)Great for mounting signs on top of gondolas without the need for adhesive. Base has gripper fins that attach securely onto the top of standard retail gondolas. Removable and easy to relocate. Soft gripper fins allow for easy sign insertion and holds signs firmly in place.
(4)Gripper fins hold signs firmly in vertical (flag) position. Use two or more holders for larger signs. Hinged style option is great for mounting signs in high traffic areas - flexible hinge swings and returns to original position when bumped. The base is designed to fit into most standard gondola uprights. Removable and reusable. No assembly required. Patented & Patent Pending.
Grippers are 3" long x 3/4" wide base
Small capacity grippers have 3/4" height; large capacity grippers have 1" height
Fits most ceiling fans on display in a retail environment. Gripper fins on the base attach to the fan blade, while the smaller gripper (leg) holds a sign or pricing material.
Two grippers joined by an integrated flexible hinge
90 degree angle connects 1-1/2" height base to 1-3/4" height leg
