(3)A dramatic, tubular way to prominently dress up signs and banners, both large and small. Grips and displays permanent or semi-permanent overhead advertisements securely and easily. Pick an internal holder option (sold separately), attach to edge of graphic and slide holder into round housing - it's that easy! Optional accessories include inserts, joiners, hanger clips and end caps. Also works great with common 1/4" to 1/2" hemmed wooden or plastic dowel rods. Optional round PVC material can be shaped and joined to create circular, oval, curved or serpentine mobiles for high visual impact.
1-5/8" O.D. round shape
Holds a wide range of sign materials
Can also be used as a matching bottom edge stabilizer
Custom colors, materials, lengths, shapes and/or mitered angle cuts also available
When inserted into the ends of our Round Graphic/Banner Hanger (sold separately), these end caps provide the finishing touch needed for an upscale appearance.
1-5/8" I.D. x 1-7/8" O.D. round shape with slot
3/4" long integrated single male insert for friction fit
For use in conjunction with our Round Graphic/Banner Hanger (sold separately). Strong spring steel, zinc plated squeeze clip that provides an adjustable hanging point by sliding into the top track of the hanger. Use more than two hanger clips for long lengths or joined housings. Otherwise known as a “Kiwi” Clip.
(2)Two of several internal holder options that grip sign edges and act as a cross member. Simply press on to graphic edge and the gripper fins hold securely. Both are for use with our Aluminum Elliptical Banner Hanger/ Round Graphic/Banner Hanger/ Square Graphic/Banner Hanger (sold separately). Removable and reusable.
Internal holder option that acts as a cross member when pressed into holes along the top or bottom edges of signs that then slide into extruded frames. Accommodate any sign material up to 0.125" thick - perfect for use with our Square Graphic/Banner Hanger (sold separately).
Recommended spacing is one fastener per 12 inches
Press fit into 5/32" sized pre-drilled/punched holes
Center flange with standard 0.305" long X-Mas Tree style fins on each side
Proper installation is when center flange is flush with sign panel
An inexpensive, friction fit straight joiner that connects two or more Round or Square Graphic/Banner Hangers (sold separately). When centered, this joiner provides approximately 3 inches of internal connection/support. For added strength, the square profile can accept two joiners with one on each side (this double option is not available for the round profile). Warning: It is required to have a hanging point located near each joined section or sign frame may buckle.
(2)Loose fitting straight metal joiner that, when integrated set screws are tightened, securely connects two or more Round Graphic/Banner Hangers (sold separately). Simply center the joiner within the inner channel of the round housing, tighten the set screws with hex wrench (sold separately) and a heavy duty connection is complete. Don't forget to include the hex wrench in hardware kits where metal joiners are required. These angled wrenches are designed to fit and turn the integrated joiner set screws, and the long arm offers extra solid turning power. Added option: Remove one set screw and connect two plates together to create unlimited custom shapes and/or mitered angles. Warning: It is required to have a hanging point located near each joined section or sign frame may buckle.
Joiner is 3" long x 0.323" wide x 0.070" thick tapped metal plate
Pre-assembled with two 10-32 x 1/2" long cup point socket set screws
Can also be used when joining a matching bottom stabilizer
Not for use with our Square Graphic/Banner Hanger
Can be ordered with two joiners connected together
Joiner is bright galvanized steel plate with black steel set screws
Hex wrench is black oxide alloy steel, and has 3/4" long short arm & 3-1/2" long arm
Wrench has 3/32" hex key size that fits the joiner's integrated 10-32 set screws
