Square Graphic / Banner Hanger Systems
square-graphic-banner-hanger-systems
Square Graphic/Banner Hanger
(3) A dramatic, tubular way to prominently dress up signs and banners, both large and small. Grips and displays permanent or semi-permanent overhead advertisements securely and easily. Pick an internal holder option (sold separately), attach to edge of graphic and slide holder into square housing - it's that easy! Optional accessories include inserts, joiners, hanger clips and end caps. Also works great with common 1/4" to 1/2" hemmed wooden or plastic dowel rods. Optional square PVC material can be shaped and joined to create circular, oval, curved or serpentine mobiles for high visual impact.- 1-1/2" square shape
- Holds a wide range of sign materials
- Can also be used as a matching bottom edge stabilizer or to ladder one sign below the other
- Custom colors, materials, lengths, shapes and/or mitered angle cuts also available
- Black high impact polystyrene (HIPS) material
Square Graphic/Banner End Cap
When inserted into the ends of our Square Graphic/Banner Hanger (sold separately), these end caps provide the finishing touch needed for an upscale appearance.- 1-1/2" square shape
- Textured face
- Two 3/4" long male insert legs
- Friction fit
- Custom colors available
- Black high impact polystyrene (HIPS) material
Square Graphic/Banner Hanger Clip
For use in conjunction with our Square Graphic/Banner Hanger (sold separately). Provides an adjustable hanging point by sliding into the top track of the hanger. Use more than two hanger clips for long lengths or joined housings.- 1-1/16" wide x 1" height x 0.080" thick with angled/curved top
- 7/32" diameter center hole
- Friction fit
- Custom colors available
- Black nylon 6/6 material
Double Barbed Graphic Fastener
Internal holder option that acts as a cross member when pressed into holes along the top or bottom edges of signs that then slide into extruded frames. Accommodate any sign material up to 0.125" thick - perfect for use with our Square Graphic/Banner Hanger (sold separately).- Recommended spacing is one fastener per 12 inches
- Press fit into 5/32" sized pre-drilled/punched holes
- Center flange with standard 0.305" long X-Mas Tree style fins on each side
- Proper installation is when center flange is flush with sign panel
- Black 6/6 nylon material
Round or Square Economy Banner Joiner
An inexpensive, friction fit straight joiner that connects two or more Round or Square Graphic/Banner Hangers (sold separately). When centered, this joiner provides approximately 3 inches of internal connection/support. For added strength, the square profile can accept two joiners with one on each side (this double option is not available for the round profile). Warning: It is required to have a hanging point located near each joined section or sign frame may buckle.- Designed for a straight, internal friction fit
- 1-3/8" height concave/curved design
- 0.030" thick black styrene material
Gripper Sign Holder Insert
(2) Two of several internal holder options that grip sign edges and act as a cross member. Simply press on to graphic edge and the gripper fins hold securely. Both are for use with our Aluminum Elliptical Banner Hanger/ Round Graphic/Banner Hanger/ Square Graphic/Banner Hanger (sold separately). Removable and reusable.- 3" long x 1/2" height with base width of 1/2"
- Other lengths available upon request
- Clear PVC material
