Vinyl Graphic Banner Hanger & Accessories
vinyl-graphic-banner-hanger---accessories
Warning: Because wood naturally takes on or gives off moisture, joiners may tend to seasonally fit tightly or loosely.
Vinyl Graphic Banner Hanger Track
(5) Are you tired of bowed, wavy or flimsy vinyl banner presentations when hung from traditional wooden dowels or strung from metal grommets? If so, we have the solution! This ingenious banner hanger track displays sewn/hemmed vinyl, fabric or paper graphics in a dramatic straight, crisp and level manner. Simply slide our Plastic Vinyl Graphic Banner Dowel Rod (sold separately) into the sleeve of an edge sewn graphic and then into the inside track - it's that easy. For longer lengths, use two or more plastic dowel rods end to end. Patent Pending.- Features a handy V-notch entryway to help banners slide in
- 1/2" wide x 7/8" overall height
- Use with end caps (sold separately) for a clean, finished appearance
- Three 3/16" diameter hanging holes (two end holes and one center hole)
- Custom lengths and colors available
- White PVC material
Banner Hanger Track End Cap Retainer
Friction fits directly onto the neck area of our line of Vinyl Graphic Banner Hanger Tracks. Provides a decorative end "stop" that helps retain our Plastic Vinyl Graphic Banner Dowel Rods within the "C" channel bottom track.- 7/8" height x 1/2" width
- External legs are 3/4" long
- Textured face
- Rectangular shape
- White polycarbonate material
Plastic Vinyl Graphic Banner Dowel Rod
(4) Use to economically display sewn/hemmed fabric or vinyl banners. Simply slide this round rigid plastic dowel into the sleeve of an edge sewn graphic and then into the inside track of our Vinyl Graphic Banner Hanger Track. Also works great with our Elliptical Aluminum Hanger (sold separately) or our Round and Square Plastic Hangers (also sold separately). Unlike wooden dowels, plastic dowels are extruded smooth with no chance of slivers or splinters. For longer lengths, use two or more dowels end to end.- 1/4" diameter solid rigid dowel
- Use with end caps (sold separately) for a clean, finished appearance
- Dowels are always produced 1/8" shorter than below stated lengths to assure a proper fit
- Custom lengths available
- White acrylic material
Wooden Banner Dowel Rods
(4) A simple, inexpensive way to support signs and displays horizontally from exposed ceilings, walls or windows. Great for displaying sewn/hemmed fabric or vinyl banners. Simply slide this round, rigid wood dowel into the top and/or bottom sleeve of an edge sewn graphic. Can be combined with Pear Clips, Snap Rings or Screw Eyes/Eyelets (sold separately) to hang signs in place. Also can be used as a stabilizer for bottom sewn/hemmed banners. Warning: Not recommended for the combined use of both barbed cords and screw eyes/eyelets unless the cord is tied directly to the screw eye.- For an additional charge, end holes can be pre-drilled and/or screw eyes/eyelets inserted
- Three common diameters to choose from
- Additional hanging accessories available such as rigid plastic End Caps and Screw Eyes (sold separately)
- Other lengths and diameters available
- Premium natural poplar or birch hardwood - kiln dried
- Sold in full bundles only
Wooden Banner Dowel Joiner
(2) For use in conjunction with our Wooden Banner Dowel Rods (sold separately). Provides a sturdy joining option for two or more of the same diameter dowels, or easy breakdown for shipping purposes. Create wider banner displays or maximize horizontal space. Strong, friction-fit connector design.Warning: Because wood naturally takes on or gives off moisture, joiners may tend to seasonally fit tightly or loosely.
- Double ended, friction-fit design
- Both sizes have an overall length of 2-9/16"
- Natural translucent polypropylene material
- Other sizes and colors available
Wooden Banner Dowel End Cap
(6) For use in conjunction with our Wooden Banner Dowel Rods (sold separately). Provides both a sturdy hanging point and a decorative finishing touch when slid onto the ends of common round wooden dowels. Works great with many common hanging hardware options such as metal hooks or barbed cords. Strong friction fit design. Warning: Not recommended for use with barbed cords unless cord is tied to the end hole. Further, because wood naturally takes on or gives off moisture, end caps may tend to fit tightly or loosely.- Both the 3/8" and 1/2" diameters have an overall length of 1-5/16" and a hole size of 3/16"
- The 3/4" diameter has an overall length of 1-7/16" and a hole size of 5/16"
- All three sizes have a 3/4" dowel receiving depth when fully inserted
- Natural translucent polypropylene material or black
- Other sizes and colors available
Wooden Banner Dowel Screw Eye
For use with our Wooden Banner Dowel Rods (sold separately). When properly inserted into pre-drilled ends of common wooden dowel rods, these inexpensive screw eyes/eyelets offer a sturdy hanging point. Works with many common hanging hardware options such as metal hooks or barbed cords.Warning: Not recommended for use with barbed cords unless cord is tied directly to the screw eye.- For an additional charge, screw eyes/eyelets can be factory inserted into our full line of wooden banner dowel rods
- 0.080" wire diameter x 13/16" overall length with 5/32" closed eye I.D.
- Other sizes and colors/finishes available
- Steel with bright zinc plate
Metal Vinyl Graphic Banner Rod System
(4) A quick and inexpensive way to suspend signs and displays horizontally from exposed solid or split beam open style warehouse ceilings. Can be combined with Pear Clips or Snap Rings (sold separately) to lock signs into place. Great for displaying sewn/hemmed fabric or vinyl banners. No tools required. Won’t sag or warp like common wooden banner dowel rods. Each complete assembly requires one support tube and two or more cable assemblies - each sold separately. Each cable assembly includes our highly popular self-locking cable adjuster with a looped cable end assembly connected to a snap-on conduit hanging clip together in a convenient polybagged kit. Warning: Use only in dry, indoor locations with conduit hanging clips placed a minimum of 3/4" inward from each end of the support tube.- Cable is 1/16" dia. (7x7) galvanized steel x 30 ft. long
- Conduit hanging clip is 3/4" wide x 1-5/8" long and is made of spring steel with zinc plate
- Round support tube is rigid 3/4" EMT conduit (0.922" O.D.) x 0.049" metal wall thickness, painted white
- 10 ft. support tube requires an additional cable assembly hanging point located in the middle
- Other cable and support tube lengths and colors available
Conduit Support Tube Hanging Clip
For use in conjunction with our line of round Conduit Support Tubes (sold separately). Ingenious push-on type hanging clip that simply and securely snaps directly onto common 3/4" (0.922" O.D.) rigid EMT conduit without the need for any additional hardware such as nuts or bolts. Integrated sharp jagged teeth hold firm and resist removal when fully engaged on painted or plain steel conduit. Center hole on top is great for attaching metal hooks, locking rings, chain or cable. Warning: Use only in dry, indoor locations with clips placed a minimum of 3/4" inward from each end of the support tube. Removable and reusable.- No tools required
- 3/4" wide x 1-5/8" long with 9/32" diameter centered top hole
- Also available in black or other colors
- 0.027" thick zinc plated spring steel
- Packaged 100 per bag
