Kinter (K International, Inc.)
3333 Oak Grove Ave.
Waukegan, IL 60087
Phone: 800.323.2389
Fax: 847.623.0105
Email: sales@kinter.com
Website: www.kinter.com
Print Back
Rectangular metal casing having a full three ceramic magnetic base for added strength. Centered, internally threaded female adapter bushing is great for receiving common externally threaded metal sign stems and rods. The perfect support adapter for larger upright signs or heavier displays. Removable and reusable. Warning: Holding capacity is the approximate maximum pull rating under ideal conditions. Always test suitability on per-application basis. For best results, use on an indoor, bare (unfinished) metal surface that is smooth and clean. Metal conditions will affect holding power. Magnets should not be used near electronic equipment.
  • Available with optional non-scratch inserts
  • 1/4" magnet base height x 7/8" wide x 3" long
  • 3/8-24 NF internally threaded center bushing having 1/2" height x 1/2" O.D.
  • 3/4" overall welded height
  • Nickel plated steel housing and threaded receiver bushing
Unit of Measure

Specifications

Overall Length

 N/A 3"

Horizontal Capacity

 N/A 22 lb

Magnet Base Height

 N/A 1/4"

Magnet Base Width

 N/A 7/8"

Magnet Base Length

 N/A 3"

Bushing Height

 N/A 1/2"

Bushing Outer Diameter (O.D.)

 N/A 1/2"

Overall Welded Height

 N/A 3/4"

Housing Material

 N/A Steel

Housing Finish

 N/A Nickel Plated

Features

 N/A Removable Reusable