Kinter (K International, Inc.)
3333 Oak Grove Ave.
Waukegan, IL 60087
Phone: 800.323.2389
Fax: 847.623.0105
Email: sales@kinter.com
Website: www.kinter.com
Print Back
Everything you need to make most any ceiling or wall surface magnetically receptive for our full line of Ladderless Magnetic Banner Hangers. Included in each clear polybagged kit are round mounting plates, toggle screw anchors, stud screws, and an easy to follow instruction sheet. Works with both hollow walls/ceilings or wood studs to create a strong hold. Pre-drilling of holes is required. Simply select a magnetic banner hanger and determine the number of magnets to then select which kit is required - it's that easy. Patented.
  • Hole drill size is 7/32" for wood studs and 1/2" for hollow walls/ceilings (drill bits sold separately)
  • Use one plate at 11 inches on center for each banner hanger magnet (not for use with our #220517 Heavy Duty Hanger)
  • Screws have a flush, low profile Phillips countersunk head
  • Plates are 0.033" thick x 4" O.D. - zinc plated steel
  • Toggle screw anchors are 10-24 (3/16") x 3" overall length - zinc plated steel
  • Stud screws are #14 x 1-3/4" overall length - zinc plated steel
  • Available in zinc plate (silver) or painted white
  • Other colors available
Unit of Measure

Specifications

Contents

 N/A Four Round Plates, Four Toggle Screw Anchors and Four Stud Screws

Finish

 N/A Zinc Plated

Hole Drill Size for Wood Studs

 N/A 7/32"

Hole Drill Size for Hollow Walls/Ceilings

 N/A 1/2"

Plate Thickness

 N/A 0.033"

Plate Outer Diameter

 N/A 4"

Overall Toggle Screw Length

 N/A 3"

Toggle Screw Size

 N/A 10-24 (3/16")

Toggle Screw Material

 N/A Steel

Material

 N/A Steel