America's #1 Rated Retail Display Hardware Provider
800.323.2389  
Are you looking to mount signs directly to glass and windows? If so, we have the solution! This ingenious two piece, interlocking wedge-shaped banner hanger assembly makes it safe and simple to display and change out signs and posters directly from glass surfaces. Each assembly consists of one suction cup track piece and one banner hanger piece - both sold separately. Simply prep the window by affixing the suction cup track piece to the glass and then slide the Atlas friction fit banner hanger piece onto the top edge of the graphic and gravity does the rest. For use from ground level with our K-Stick® Ladderless Poles. Removable and reusable - all safely from floor level. Warning: Suction cup release tabs must not face directly upward or mating banner hanger may catch and cause cups to release. Please note: Temperature and humidity may cause a suction cup to lose its grip. When applied to a clean, dry, non-porous surface above 40°F (5°C), these cups should have an operating range of -22° to 120°F (-30° to 49°C). Patented.
  • Suction Cup Track and Atlas Banner Hanger are each sold separately
  • Suction cup track piece comes with 2-1/2" O.D. pre-assembled suction cups, measures 1-1/2" in total height, and requires a minimum of 2-1/2" of clearance from the top of window frame
  • Atlas friction fit banner hanger piece is 2" wide x 1" overall height
  • Not recommended for outdoor use
  • Custom colors and lengths available
  • Clear PVC material
Unit of Measure

Specifications

Length

N/A 48"

Grip Capacity

N/A Up to 0.125"

Assembly Type

N/A Atlas Banner Hanger

Safe Working Load Limit

N/A 2 lb

Material

N/A Polyvinyl Chloride (PVC)

Color

N/A Clear

Width

N/A 2"

Overall Height

N/A 1"