800.323.2389
Contact Us
Download Our Catalog
Phone: 800-323-2389
Fax: 847-623-0105
Email: sales@kinter.com
Request Information
Download Catalog

Products
Custom Design & Capabilities
Display Categories
Resources
- Blog
- Catalog
About

Products
Custom Design & Capabilities
Display Categories
Resources
- Blog
- Catalog
About

800.323.2389
Contact Us
Download Our Catalog
Phone: 800-323-2389
Fax: 847-623-0105
Email: sales@kinter.com
Request Information
Download Catalog

Speak with KinterCare™

New Products Label Solutions Display Hooks Product Merchandising Sign & Literature Holders Display Construction Rings & Binder Posts Ceiling Systems & Accessories Cable & Chain K-Stick® Ladderless Sign Hanging System Fasteners & Secondary Operations Free Sample Rack siffron™ Part Number Cross-Reference Guide*

Download Catalog

Quotes (0)

All Categories > Cable & Chain > Steel Cable

Steel Cable

Request Information

Steel Cable steel-cable-spools

Steel Cable

(29) Flexible galvanized aircraft quality cable (wire rope) is stronger and less expensive than chain. Also, cable is thinner and less noticeable than chain. The recommended safe working load is a 5 to 1 ratio (i.e. approximate break strength divided by 5).

Both bare and coated cable available
Packaged on single plastic spools at the lengths listed below
Custom lengths available

/Asset/cable-spools.jpg

Cable Sleeves (Crimps)

Cable Sleeves (Crimps)

(4) Cable sleeves are used in conjunction with steel cable for looping and swaging ends. Warning: Swaging over vinyl or nylon coated cable will result in severely reduced holding power and is not recommended in applications where human safety, lifting or full wire strength is involved.

Oval duplex design
Cable sleeves are also known as Crimps or Ferrules

/Asset/105003.jpg

Custom Cable Assemblies

Looped End Cable Assemblies

(12) Flexible bare steel cable assemblies with factory installed, crimped-on fittings. Very strong and durable.

Standard assemblies (those listed below) have cable-sleeved loops on both ends
Custom lengths, cable diameters or loop configurations are also available
Other cable endings include straight cuts (no fitting), button stops, eyelets and ball stops

/Asset/102006.jpg

Fixed Style Cable End - Snap Hook

Fixed Style Cable End - Snap Hook

When properly swaged over 1/16" bare cable (sold separately), this fitting gives you a fixed snap hook at the end of your cable assembly. J-shaped, spring snap design offers multiple uses. Creates a quick and easy way to hang banners, displays, or even lighting and electrical fixtures. Please note: This fitting cannot be crimped with a hand swager tool. This must be factory installed (crimped) using a hydraulic press - please inquire with cable length(s) required. Warning: Not designed for lifting.

2-1/8" overall length
When crimped onto cable, will extend cable assembly by approximately 1-1/2" per end
0.175" wire diameter
3/8" snap opening
Zinc plated steel

/Asset/Fixed-Style-Cable-End---Snap-Hook-primary-3x5.jpg

Custom Design & Capabilities

Display Categories

Continuous Improvement Program (CIP)

Contact Us
Phone: 800.323.2389
Fax: 847.623.0105
Email: sales@kinter.com

3333 Oak Grove Ave.
Waukegan, IL 60087

Request Information

Download Catalog

© 2024 Kinter | Privacy Policy | Terms & Conditions | Site Map

Kinter's (K International, Inc.'s) parts are not manufactured by or connected in any way with Siffron^™.