Kinter (K International, Inc.) - Ladderless Cleat Banner Hanger For Glass

Are you looking to mount signs directly to glass and windows? If so, we have the solution! This ingenious two piece, interlocking wedge-shaped banner hanger assembly makes it safe and simple to display and change out signs and posters directly from glass surfaces. Each assembly consists of one suction cup track piece and one banner hanger piece - both sold separately. Simply prep the window by affixing the suction cup track piece to the glass and then slide the Atlas friction fit banner hanger piece onto the top edge of the graphic and gravity does the rest. For use from ground level with our K-Stick® Ladderless Poles. Removable and reusable - all safely from floor level. Warning: Suction cup release tabs must not face directly upward or mating banner hanger may catch and cause cups to release. Please note: Temperature and humidity may cause a suction cup to lose its grip. When applied to a clean, dry, non-porous surface above 40°F (5°C), these cups should have an operating range of -22° to 120°F (-30° to 49°C). Patented.

Suction Cup Track and Atlas Banner Hanger are each sold separately
Suction cup track piece comes with 2-1/2" O.D. pre-assembled suction cups, measures 1-1/2" in total height, and requires a minimum of 2-1/2" of clearance from the top of window frame
Atlas friction fit banner hanger piece is 2" wide x 1" overall height
Not recommended for outdoor use
Custom colors and lengths available
Clear PVC material

Ladderless Cleat Banner Hanger For Glass

Unit of Measure

Items	220601C 22" Length Ladderless Cleat Banner Hanger For Glass	220602C 24" Length Ladderless Cleat Banner Hanger For Glass	220604C 36" Length Ladderless Cleat Banner Hanger For Glass	220605C 48" Length Ladderless Cleat Banner Hanger For Glass	220606C 22" Length Ladderless Cleat Banner Hanger For Glass
Description	N/A Are you looking to mount signs directly to glass and windows? If so, we have the solution! This ingenious two piece, interlocking wedge-shaped banner hanger assembly makes it safe and simple to display and change out signs and posters directly from glass surfaces. Each assembly consists of one suction cup track piece and one banner hanger piece - both sold separately. Simply prep the window by affixing the suction cup track piece to the glass and then slide the Atlas friction fit banner hanger piece onto the top edge of the graphic and gravity does the rest. For use from ground level with our K-Stick® Ladderless Poles. Removable and reusable - all safely from floor level. Warning: Suction cup release tabs must not face directly upward or mating banner hanger may catch and cause cups to release. Please note: Temperature and humidity may cause a suction cup to lose its grip. When applied to a clean, dry, non-porous surface above 40°F (5°C), these cups should have an operating range of -22° to 120°F (-30° to 49°C). Patented. Suction Cup Track and Atlas Banner Hanger are each sold separately Suction cup track piece comes with 2-1/2" O.D. pre-assembled suction cups, measures 1-1/2" in total height, and requires a minimum of 2-1/2" of clearance from the top of window frame Atlas friction fit banner hanger piece is 2" wide x 1" overall height Not recommended for outdoor use Custom colors and lengths available Clear PVC material
Length	N/A 22"	N/A 24"	N/A 36"	N/A 48"	N/A 22"
Grip Capacity	N/A	N/A	N/A	N/A	N/A Up to 0.125"
Number of Suction Cups	N/A 2	N/A 2	N/A 3	N/A 4	N/A
Assembly Type	N/A Suction Cup Track	N/A Suction Cup Track	N/A Suction Cup Track	N/A Suction Cup Track	N/A Atlas Banner Hanger
Safe Working Load Limit	N/A 2 lb
Material	N/A Polyvinyl Chloride (PVC)
Color	N/A Clear
Width	N/A	N/A	N/A	N/A	N/A 2"
Overall Height	N/A	N/A	N/A	N/A	N/A 1"
Suction Cup Outer Diameter	N/A 2-1/2"	N/A 2-1/2"	N/A 2-1/2"	N/A 2-1/2"	N/A
Suction Cup Track Total Height	N/A 1-1/2"	N/A 1-1/2"	N/A 1-1/2"	N/A 1-1/2"	N/A