Kinter (K International, Inc.)
3333 Oak Grove Ave.
Waukegan, IL 60087
Phone: 800.323.2389
Fax: 847.623.0105
Email: sales@kinter.com
Website: www.kinter.com
Print Back
A safe and simple way to hang signs and banners from metal ceiling grids/surfaces that are up to 23 feet in height. Unlike our stationary ladderless options, this hanger turns a full 360 degrees, thus allowing your signage to be faced at optimal viewing angles. Strong magnetic design with integrated holes and a "C" channel bottom track that accepts various sign hanging options such as plastic and metal hooks, clips, rings, cable or chain (all sold separately). For both placing and pivoting from ground level, use our K-Stick® Ladderless Poles. Simply pick a sign hanging option, attach to both the hanger and the edge of the graphic, elevate, align into position and release - it's that easy! Removable and reusable - all safely from floor level. Warning: Metal conditions will affect holding power. Magnets should not be used near electronic equipment. Patented.
  • 1-1/8" wide x 1-5/8" overall joined height (including attached ceramic magnets)
  • Two 3/16" diameter hanging holes (one at each end)
  • Not recommended for use on ceiling grid perimeters
  • Custom lengths and colors available
  • White PVC with nickel plated steel magnets
  • * Safe working load limit is based on a single banner hanger having a minimum of two sign hanging points
Unit of Measure

Specifications

Length

 N/A 26"

Number of Magnets

 N/A 3

Safe Working Load Limit*

 N/A 3 lb

Angle

 N/A 360 º

Width

 N/A 1-1/8"

Overall Joined Height

 N/A 1-5/8"

Hanging Hole Diameter

 N/A 3/16"

Material

 N/A Polyvinyl Chloride (PVC)

Color

 N/A White

Note

N/A * Safe working load limit is based on a single banner hanger having a minimum of two sign hanging points.